By finding out what you can expect from your local Flooring Installation in Edinburgh you can be better prepared for the fitting of your new floors. Whether you have ordered carpet, laminate, solid wood or any other type of floor covering from anywhere in the country, the process of installation is similar.
The Survey And Measuring Up
The fitter should come and take measurements of your room before any work commences. He or she will also check the doors to ensure that there is sufficient clearance and assess the condition of your sub floor. For older properties it would be wise to check on local building and planning guidance in Edinburgh for examples of past conversions and how issues such as floor levels and fire doors have been addressed.
Clearing And Prepping The Room
The furniture is moved to the side of the room and the old flooring taken up. Any existing skirting boards that need to be removed for the new flooring to be put down are taken down prior to the new flooring arrival. Also if the new flooring is going to be higher than the existing flooring then the existing skirting boards will need to be removed prior to the new flooring being laid.
Checking The Subfloor
First the subfloor is checked for level and dryness. Checking subfloor moisture levels prior to laying of the floor is essential as trapped damp can cause the new floor to lift or even develop mould and begin to warp within a few months. Any dips or uneven areas are filled with a levelling compound and left to set for several hours, possibly days depending on the type of screed used.
Letting Materials Settle
Timber and laminate flooring will have been left in the room, in their boxes, for approximately 48 hours prior to laying to allow the flooring to acclimate to the room temperature and relative humidity. This will prevent the flooring from expanding and causing gaps between the boards once laid. Carpet and Vinyl do not require acclimatizing.
Laying The Floor
For areas to be covered with carpet the underlay will be laid first and then the carpet laid in specific ways such as stretching and joining with good quality seams. The joins are positioned to avoid high wear areas such as paths to doors.
A useful reference for Flooring Edinburgh is https://www.kristoffersencarpets.com/.
Finishing Touches And Snagging
Once the new floor has been laid the floor fitter will refit your skirting boards and any door trim and will check all edges for any loose boards, also looking for any gaps or uneven joins and sorting any problems there may be before leaving your property.
It’s really useful to know what happens in relation to the jobs you’ve ordered to help plan how the fitters can gain access and for how long they will need to be in the room.
