Pricing for ready-mix concrete is not set in stone and can vary depending on a few key decisions you take prior to ordering.
Volume Ordered
They usually charge by the volume of concrete in cubic meters. Be aware that for small loads of concrete they might charge a short-load surcharge. So, it’s best to order ready-mix concrete in volume as close as possible to your needs. But if you are below the minimum, then it’s best to round up rather than pay the surcharge for a short load.
Mix Specification
As with anything that contains more cement than necessary (i.e. stronger mixes), ready-mix will cost more. So, make sure you’re not specifying too much for the job. The majority of suppliers in the UK will use the following standard mix designations: C7/10, C10, C12/15, C20, C25 and C30/37 – all which clearly show the strength classification for each mix.
Access and Pump Hire
If the ready-mix lorry cannot get right up to where the concrete is going to be poured then you will need to hire a pump or use a conveyor. The cost of hiring will, of course, be added to the cost of the ready-mix. Ensure that you clear access prior to delivery to avoid unnecessary waiting charges, which are typically charged on an hourly basis.
Timing and Lead Time
Book in advance of need to avoid higher last minute charges, ideally booking a day or two in advance to allow the plant to schedule your delivery efficiently and possibly save on a small charge.
Distance from the Plant
Delivery costs increase with distance. So buying concrete locally is cheaper.
For Concrete Tewkesbury, see https://www.monstermixconcrete.co.uk/concrete-tewkesbury/.
A little planning around these 5 points can save you a lot of money on your concrete delivery.
