If the parts you require are not readily available from the builder’s merchants then chances are the parts from the fabricators will fit just as well. The difference is that the fabricator will enable you to complete the job in question.
Your Sizes Don’t Match Stock
A structural steel beam or post may need to span an unusual gap or carry a specific load. This means that the standard sections of a builder’s merchant will not be suitable. The fabricator can cut and weld the steel to the exact size of the part required for the project.
The Work Must Meet Regulated Standards
Work such as metalwork for food production units or for industrial sites in controlled environments is produced by certified fabricators as standards that apply to structural steel fabrication work and is fully documented. Such work is outside the remit of a general builder.
You Need Load-Rated Brackets or Frames
For mezzanine floors, heavy shelving supports and other structures like industrial premises metalwork loads can be very high. Therefore structures need to be designed with proper tolerances in mind and loads clearly outlined. The type of metalwork required for such structures can often not be sourced from standard fitting merchants or even made by a DIY enthusiast.
Existing Metalwork Needs Welding or Cutting
Work is often required to be completed by one trade i.e. the Fabricator. They are able to design and complete installations of course install the work, thus saving time and much headache in coordinating other trades.
One Trade for Design and Install
However working with a single fabricator who can design, cut and install your steel work can save a huge time saver, and stop you having to organise and co-ordinate lots of different trades.
For Fabrication Company Gloucester, see www.mber.uk/steel-services/fabrication-gloucester.
In summary, if any of the above scenarios apply to you, then employing the services of a fabricator would be the best way to go.
